ALL-TERRAIN T/A KO3

BFGoodrich All-Terrain T/A KO3

Legendary toughness, made tougher

Designed for CUVs, SUVs, & Pickups
Severe Snow Rated
Baja Champion
Kilometers warranty: 80,000 kilometers
Standard Limited Warranty: 6 years

BFGoodrich

Key benefits for All-Terrain T/A KO3 tire

Engineered to Endure

We engineered the BFGoodrich All-Terrain T/A KO3 tire with a new tread pattern and new all-terrain tread compound to provide durability and longevity, even on gravel. An optimized footprint and full-depth locking 3D sipes designed for even wear over the long haul.

BFGoodrich All-Terrain T/A KO3 Warranties

Standard Limited Warranty

All BFGoodrich tires have a Standard Manufacturer's Limited Warranty, which covers defects in workmanship and materials for the life of the original usable tread, or for 6 years from date of purchase, whichever occurs first.

Discover more

Download document

No reviews yet, be our first reviewer!

Give us your feedback of the All-Terrain T/A KO3

Write a review

For any matter regarding customer service (in-store experience, after-sales service, delivery, etc.) please contact our Consumer Care team.

Legal Mentions

¹ Guarantee applies to up to 6 tires per customer. Guarantee applies only to tires that were purchased and mounted and does not apply to exchanged tires that were provided under this guarantee. The guarantee does not include the cost of valve stems. Tires that are damaged due to misuse or misapplication, road hazards, mechanical problems related to the vehicle, use in any racing-related activities, or competitive events, or tires that are removed from the original vehicle on which they were installed, are excluded from guarantee.

OE Code: FOR = Ford, GM = General Motors

Government UTQG Ratings do not apply to light truck sized tires.

>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.

>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.

>> Tread patterns are often tuned to accommodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph.

WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations. No tire is indestructible. An impact can cause a tire to fail, resulting in serious injury or death. Consult your tire owner's manual for proper maintenance instructions.

When replacing an Original Equipment P-Metric or Euro Metric size tire with an LT-metric or High Flotation size tire, the air pressures of the LT-metric / High Flotation tire must be adjusted in order to properly carry the load of the vehicle. See your BFGoodrich Tires dealer for the proper air pressure recommendation.

DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.

Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.

For high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual.

For speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below.

Q-Speed Rated Sizes:

Maximum Speed (km/h)	100
Inflation Increase (psi)	0.0
Load Capacity (% of max.)	100

R-Speed Rated Sizes:

Maximum Speed (km/h)	100	106
Inflation Increase (psi)	0.0	1.0
Load Capacity (% of max.)	100	100

S-Speed Rated Sizes:

Maximum Speed (km/h)	100	106	112
Inflation Increase (psi)	0.0	1.0	2.0
Load Capacity (% of max.)	100	100	100

T-Speed Rated Sizes:

Maximum Speed (km/h)	100	106	112	118
Inflation Increase (psi)	0.0	1.0	2.0	3.0
Load Capacity (% of max.)	100	100	100	100